#STOCK TANK POOL FULL#
#STOCK TANK POOL FREE#

If that number is under 50, the deck should be able to handle the weight, assuming the deck framing is in good condition.

With that in mind, divide the weight of the stock tank (including water and occupants) by its total area. (Don’t forget to add about 150 pounds per occupant.) Most decks can handle 50 pounds per square foot. Once you know how much the stock tank weighs, you can make a quick calculation to determine if your deck is strong enough to hold it.

#STOCK TANK POOL FULL#

That’s about the weight of a midsize car, so it’s crucial to consider how much it weighs when full, especially if you plan to put it on an existing deck or to build some other structure that will be able to handle the tank, water, and bathers.įortunately, you can calculate a stock tank’s weight when it’s full fairly easily: Simply multiply its capacity in gallons by 8.35 pounds, which is the weight of one gallon of water, and then add in the weight of the pool itself. Generally speaking, stock tanks used as pools should have a length or diameter of at least 5 feet and a capacity of at least 80 gallons, which roughly equates to the size and capacity of an average bathtub.Ī 400-gallon stock tank will weigh about 3,500 pounds when full, not including occupants. Tanks can range from 2 to 10 feet in length and width for square or rectangular tanks, and 2 to 10 feet in diameter for round tanks, and they can hold between 25 and 800 gallons of water. For bathers’ comfort, consider situating the stock tank pool in the shade of a tree or on a covered patio to maintain a pleasant water temperature.

Lighter plastic tanks may be set up on either soft or hard surfaces. In general, heavier metal tanks require a solid foundation like concrete and shouldn’t be set up on wooden decks, which can rot.

#STOCK TANK POOL FREE#

The ground must also be level and free of rocks. You’ll need to make sure that the location can support the weight of not only the tank and water, but also of the people who will be taking a dip. First, decide where the stock tank pool should go.Īlthough setting up a stock tank pool is an easy enough DIY, it’s not as simple as plopping the tank down just anywhere and filling it up with water from your garden hose. Read on to learn what’s involved in purchasing, installing, and maintaining a stock tank pool. You’ll also need to learn maintenance practices that will ensure your water-trough pool is free of debris, human contaminants, and waterborne bacteria that can cause rashes or infections. Generally, metal tanks cost 35 percent more than plastic ones, and the larger the size and capacity, the more expensive the tank.Ĭost, however, is only one concern. While an in-ground swimming pool can cost $20,000 to $65,000, and an above-ground pool can set you back about $3,000 on average, a stock tank can be had for between $200 to $450. There are, however, several shopping and setup factors to figure out before setting up a DIY a stock tank pool in your own yard. Stock tanks are widely available at tractor supply stores and are well suited for the farmhouse-rustic design trend. These DIY pools repurpose the large containers that traditionally provide water to livestock as affordable alternatives to above-ground swimming pools.

If you’ve spent any time at all on social media these past few years, you’ve probably heard stories about homeowners who have eschewed typical swimming pools and have instead set up stock tank swimming pools in their yards.

Stock tank pool